CMS 122v13: Diabetes: Glycemic Status Assessment Greater Than 9%

Measure: Percentage of patients 18-75 years of age with diabetes who had a glycemic status assessment (hemoglobin A1c [HbA1c] or glucose management indicator [GMI]) > 9.0% during the measurement period
Measure Type High Priority Measure Scoring
Outcome Yes A lower percentage indicates better quality
Denominator Patients 18-75 years of age by the end of the measurement period, with diabetes with a visit during the measurement period
Numerator Patients whose most recent glycemic status assessment (HbA1c or GMI) (performed during the measurement period) is >9.0% or is missing, or was not performed during the measurement period
Denominator Exceptions None
Denominator Exclusions
  • Patients in hospice care for any part of the measurement period
  • Patients receiving palliative care for any part of the measurement period
  • Patients 66 and older by the end of the measurement period who are living long term in a nursing home any time on or before the end of the measurement period
  • Patients 66 and older by the end of the measurement period with an indication of frailty for any part of the measurement period who also meet any of the following advanced illness criteria:

    • Advanced illness diagnosis during the measurement period or the year prior

    • OR taking dementia medications during the measurement period or the year prior

This eCQM requires a lab interface to be met. Customers interested in a lab interface should contact Sevocity Support to begin the process of a new interface setup. Interface setup requirements and fees vary per request.

Patients who meet the following criteria will be included in the denominator:

  • Age is 18 years to 75 years at the end of the Measurement Period

    AND

  • Have an active diagnosis of Type 1 or Type 2 diabetes during the Measurement Period

    AND

  • Have at least one eligible encounter during the Measurement Period finalized by the EC

CPT: 99202, 99203, 99204, 99205, 99212, 99213, 99214, 99215, 99395, 99396, 99397, 99385, 99386, 99387, 99341, 99342, 99344, 99345, 99347, 99348, 99349, 99350, 98966, 98967, 98968, 99441, 99442, 99443, 97802, 97803, 97804

HCPCS: G0402, G0438, G0439, G0270, G0271, G0447, S9449, S9452, S9470

Diagnoses are documented in the Assessment tab of an encounter. A comprehensive list of eligible diagnosis codes for diabetes can be located here.

A patient will be excluded from this measure if they meet any of the following conditions:

  • Is in hospice care for any part of the Measurement Period
  • Is receiving palliative care for any part of the Measurement Period
  • Age is ≥ 66 at the end of the Measurement Period and are living long term in a nursing home any time on or before the end of the Measurement Period
  • Age is ≥ 66 at the end of the Measurement Period and has evidence of frailty and advanced illness

To document hospice care ambulatory services, go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add one of the eligible codes listed below:

CPT: 99377, 99378

HCPCS: G0182

Order Status must be marked as Pending or Complete.

To document hospice care encounter services, go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add one of the eligible codes listed below:

HCPCS: G9996, G9473, G9474, G9475, G9476, G9477, G9478, G9479, Q5003, Q5004, Q5005, Q5006, Q5007, Q5008, Q5010, S9126, T2042, T2043, T2044, T2045, T2046

Order Status must be marked as Complete.

Palliative care services can be documented using the FACIT-Pal Questionnaire flowsheet, as an order, or as a diagnosis.

  1. Go to Encounter > Flowsheets/Labs > Standard or Chart > Flowsheets/Labs > Standard

  2. Click Add New Flowsheet

  3. Select the FACIT-Pal Questionnaire flowsheet and click Add

  4. Click Add Column

  5. Populate the patient's responses to the questions as appropriate

  6. Click OK to save

Go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add one of the eligible codes listed below:

HCPCS: G9054, M1017

Order Status must be marked as Complete.

Diagnoses are documented in the Assessment tab of an encounter. The eligible diagnosis code for palliative care is:

ICD-10: Z51.5

To document a nursing home stay:

  1. Go to Chart > Demographics > Patient Info

  2. Click Update

  3. Click Additional Info tab

  4. Populate the Date field in the Pop. Info section

  5. Select Patient lives in nursing home for Housing Status

  6. Click Save

A patient has evidence of frailty if they meet any of the following criteria:

  • Has an active diagnosis of Frailty during the Measurement Period
  • Has an active diagnosis of Frailty Symptom during the Measurement Period
  • Is using a frailty device during the Measurement Period
  • Has a frailty encounter during the Measurement Period

"Frailty" refers to a range of conditions that includes falls and problems affecting mobility.

Diagnoses are documented in the Assessment tab of an encounter. A comprehensive list of eligible diagnosis codes for frailty can be located here.

Diagnoses are documented in the Assessment tab of an encounter. The eligible diagnosis codes for frailty symptoms are:

ICD-10: R26.2, R26.89, R26.9, R53.1, R53.81, R54, R62.7, R63.4, R63.6, R64

To document the patient's use of a frailty device:

  1. Go to Encounter > Flowsheets/Labs > Standard or Chart > Flowsheets/Labs > Standard
  2. Click Add New Flowsheet
  3. Select the Frailty Device flowsheet and click Add
  4. Click Add Column
  5. Select a Device and the type (Value) of device
  6. Populate a usage Start Date for the device
  7. Optional: populate a usage Stop Date for the device
    1. The Stop Date cannot occur prior to the start of the Measurement Period
  8. Optional: populate a Reason for use of the device
  9. Click OK to save

CPT: 99504, 99509

HCPCS: G0162, G0299, G0300, G0493, G0494, S0271, S0311, S9123, S9124, T1000, T1001, T1002, T1003, T1004, T1005, T1019, T1020, T1021, T1022, T1030, T1031

A patient has evidence of advanced illness if they meet any of the following criteria:

  • Had an active diagnosis of Advanced Illness during the Measurement Period or in the year prior
  • Was prescribed medication for dementia during the Measurement Period or in the year prior

"Advanced illness" refers to a wide range of conditions and includes diseases such as Alzheimer's disease, cancer, and heart failure.

Diagnoses are documented in the Assessment tab of an encounter. A comprehensive list of eligible diagnosis codes for advanced illness can be located here.

To prescribe a medication, go to Encounter > Medications > Manage/Prescribe Meds > New Prescription or Chart > Medications/Assessments > Modify. A comprehensive list of eligible dementia medications can be located here.

A patient will be counted in the numerator if they have an e-Lab result with a glycemic status assessment (HbA1c or GMI) greater than 9% stored to their chart during the Measurement Period. A patient will be also be counted in the numerator if the most recent glycemic status assessment result is missing or if there are no glycemic status assessments performed and no results documented during the Measurement Period.

If there are multiple glycemic status assessment results within the Measurement Period, the lowest result will be counted toward the numerator.

  1. From the Clinic Inbox, select the lab result to be stored and click View
    1. If the lab result is systematically matched to a patient, the Patient section will be populated in the lab result display
    2. If the lab result is not matched or the matched patient needs to be changed, the user will need to search for the patient
  2. Optional: click Select to search for and select a patient
  3. Select the I have verified the following lab results belong to the above patient checkbox
  4. Click Sign/Route
  5. Select the Sign checkbox and click OK

Stored e-Lab results can be viewed in the Flowsheets/Labs > Scanned/E-Labs tab of the patient chart.

https://ecqi.healthit.gov/ecqm/ec/2025/cms0122v13

 

Return to 2025 eCQMs

 

Didn't find the answer you were looking for?

Contact Sevocity Support 24/7 at 877‑777‑2298 or support@sevocity.com