CMS 130v11: Colorectal Cancer Screening

Measure: Percentage of adults 45-75 years of age who had appropriate screening for colorectal cancer
Measure Type High Priority Measure Scoring
Process No A higher percentage indicates better quality
Denominator Patients 46-75 years of age by the end of the measurement period with a visit during the measurement period
Numerator

Patients with one or more screenings for colorectal cancer. Appropriate screenings are defined by any one of the following criteria:

  • Fecal occult blood test (FOBT) during the measurement period
  • Flexible sigmoidoscopy during the measurement period or the four years prior to the measurement period
  • Colonoscopy during the measurement period or the nine years prior to the measurement period
  • FIT-DNA during the measurement period or the two years prior to the measurement period
  • CT Colonography during the measurement period or the four years prior to the measurement period
Denominator Exceptions None
Denominator Exclusions
  • Patients with a diagnosis or past history of total colectomy or colorectal cancer
  • Patients in hospice care for any part of the measurement period
  • Patients receiving palliative care for any part of the measurement period
  • Patients 66 and older by the end of the measurement period who are living long term in a nursing home any time on or before the end of the measurement period
  • Patients 66 and older by the end of the measurement period with an indication of frailty for any part of the measurement period who also meet any of the following advanced illness criteria:
    • Advanced illness with two outpatient encounters during the measurement period or the year prior
    • OR advanced illness with one inpatient encounter during the measurement period or the year prior
    • OR taking dementia medications during the measurement period or the year prior

A lab interface can be used to meet this eCQM but is not required. Customers interested in a lab interface should contact Sevocity Support to begin the process of a new interface setup. Interface setup requirements and fees vary per request.

Patients who meet the following criteria will be included in the denominator:

  • Age is 46 years to 75 years at the end of the Measurement Period

    AND

  • Have at least one eligible encounter during the Measurement Period finalized by the EC

CPT: 99201, 99202, 99203, 99204, 99205, 99212, 99213, 99214, 99215, 99395, 99396, 99397, 99385, 99386, 99387, 99341, 99342, 99343, 99344, 99345, 99347, 99348, 99349, 99350, 98969, 98970, 98971, 98972, 99421, 99422, 99423, 99458, 98966, 98967, 98968, 99441, 99442, 99443

HCPCS: G0438, G0439, G0071, G2010, G2012, G2061, G2062, G2063

A patient will be excluded from the measure if they meet any of the following conditions:

  • Has an active diagnosis of colorectal cancer during the Measurement Period
  • Had a total colectomy
  • Is in hospice care for any part of the Measurement Period
  • Is receiving palliative care for any part of the Measurement Period
  • Age is ≥ 66 at the end of the Measurement Period and are living long term in a nursing home any time on or before the end of the Measurement Period
  • Age is ≥ 66 at the end of the Measurement Period and has evidence of frailty and advanced illness

Diagnoses are documented in the Assessment tab of an encounter. A comprehensive list of eligible diagnosis codes for malignant neoplasm of the colon can be located here.

To document a total colectomy procedure, go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add one of the eligible codes listed below:

CPT: 44150, 44151, 44152, 44153, 44155, 44156, 44157, 44158, 44210, 44211, 44212

Order Status must be marked as Complete.

To document hospice care ambulatory services, go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add one of the eligible codes listed below:

CPT: 99377, 99378

HCPCS: G0182

Order Status must be marked as Pending or Complete.

To document hospice care encounter services, go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add one of the eligible codes listed below:

HCPCS: G9996, G9473, G9474, G9475, G9476, G9477, G9478, G9479, Q5003, Q5004, Q5005, Q5006, Q5007, Q5008, Q5010, S9126, T2042, T2043, T2044, T2045, T2046

Order Status must be marked as Complete.

Palliative care services can be documented using the FACIT-Pal Questionnaire flowsheet, as an order, or as a diagnosis.

  1. Go to Encounter > Flowsheets/Labs > Standard or Chart > Flowsheets/Labs > Standard

  2. Click Add New Flowsheet

  3. Select the FACIT-Pal Questionnaire flowsheet and click Add

  4. Click Add Column

  5. Populate the patient's responses to the questions as appropriate

  6. Click OK to save

Go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add one of the eligible codes listed below:

HCPCS: G9054, M1017

Order Status must be marked as Complete.

Diagnoses are documented in the Assessment tab of an encounter. The eligible diagnosis code for palliative care is:

ICD-10: Z51.5

To document a nursing home stay:

  1. Go to Chart > Demographics > Patient Info

  2. Click Update

  3. Click Additional Info tab

  4. Populate the Date field in the Pop. Info section

  5. Select Patient lives in nursing home for Housing Status

  6. Click Save

A patient has evidence of frailty if they meet any of the following criteria:

  • Has an active diagnosis of Frailty during the Measurement Period
  • Has an active diagnosis of Frailty Symptom during the Measurement Period
  • Is using a frailty device during the Measurement Period
  • Has a frailty encounter during the Measurement Period

"Frailty" refers to a range of conditions that includes falls and problems affecting mobility.

Diagnoses are documented in the Assessment tab of an encounter. A comprehensive list of eligible diagnosis codes for frailty can be located here.

Diagnoses are documented in the Assessment tab of an encounter. The eligible diagnosis codes for frailty symptoms are:

ICD-10: R26.0, R26.1, R26.2, R26.89, R26.9, R41.81, R53.1, R53.81, R53.83, R54, R62.7, R63.4, R63.6, R64

To document the patient's use of a frailty device:

  1. Go to Encounter > Flowsheets/Labs > Standard or Chart > Flowsheets/Labs > Standard
  2. Click Add New Flowsheet
  3. Select the Frailty Device flowsheet and click Add
  4. Click Add Column
  5. Select a Device and the type (Value) of device
  6. Populate a usage Start Date for the device
  7. Optional: populate a usage Stop Date for the device
    1. The Stop Date cannot occur prior to the start of the Measurement Period
  8. Optional: populate a Reason for use of the device
  9. Click OK to save

CPT: 99504, 99509

HCPCS: G0162, G0299, G0300, G0493, G0494, S0271, S0311, S9123, S9124, T1000, T1001, T1002, T1003, T1004, T1005, T1019, T1020, T1021, T1022, T1030, T1031

A patient has evidence of advanced illness if they meet any of the following criteria:

  • Had an inpatient encounter with an active diagnosis of Advanced Illness during the Measurement Period or in the year prior
  • Had 2 or more outpatient encounters with an active diagnosis of Advanced Illness during the Measurement Period or in the year prior
    • Encounters must have different dates of service
    • Diagnosis must be active during all eligible encounters
  • Was prescribed medication for dementia during the Measurement Period or in the year prior

"Advanced illness" refers to a wide range of conditions and includes diseases such as Alzheimer's disease, cancer, and heart failure.

Diagnoses are documented in the Assessment tab of an encounter. A comprehensive list of eligible diagnosis codes for advanced illness can be located here.

CPT: 99221, 99222, 99223, 99231, 99232, 99233, 99238, 99239, 99251, 99252, 99253, 99254, 99255, 99291

CPT: 99201, 99202, 99203, 99204, 99205, 99211, 99212, 99213, 99214, 99215, 99241, 99242, 99243, 99244, 99245, 99341, 99342, 99343, 99344, 99345, 99347, 99348, 99349, 99350, 99381, 99382, 99383, 99384, 99385, 99386, 99387, 99391, 99392, 99393, 99394, 99395, 99396, 99397, 99401, 99402, 99403, 99404, 99411, 99412, 99429, 99455, 99456, 99483, 99217, 99218, 99219, 99220, 99281, 99282, 99283, 99284, 99285, 99304, 99305, 99306, 99307, 99308, 99309, 99310, 99315, 99316, 99318, 99324, 99325, 99326, 99327, 99328, 99334, 99335, 99336, 99337

HCPCS: G0402, G0438, G0439, G0463, T1015

To prescribe a medication, go to Encounter > Medications > Manage/Prescribe Meds > New Prescription. A comprehensive list of eligible dementia medications can be located here.

A patient will be counted in the numerator if they received at least one of the following colon cancer screenings:

  • Colonoscopy during the Measurement Period or in the 9 years prior
  • Flexible sigmoidoscopy during the Measurement Period or in the 4 years prior
  • FOBT during the Measurement Period
  • FIT-DNA test during the Measurement Period or in the 2 years prior
  • CT Colonography during the Measurement Period or in the 4 years prior

To document a colonoscopy or flexible sigmoidoscopy procedure, go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add one of the eligible codes listed below. Order Status must be marked as Complete.

Colonoscopy

CPT: 44388, 44389, 44390, 44391, 44392, 44393, 44394, 44397, 44401, 44402, 44403, 44404, 44405, 44406, 44407, 44408, 45355, 45378, 45379, 45380, 45381, 45382, 45383, 45384, 45385, 45386, 45387, 45388, 45389, 45390, 45391, 45392, 45393, 45398

HCPCS: G0105, G0121

Flexible Sigmoidoscopy

CPT: 44397, 45330, 45331, 45332, 45333, 45334, 45335, 45337, 45338, 45339, 45340, 45341, 45342, 45345, 45346, 45347, 45349, 45350

HCPCS: G0104

To document that a CT Colonography, FOBT, or FIT-DNA test was performed, an e-Lab result for the test must be stored to the patient chart.

  1. From the Clinic Inbox, select the lab result to be stored and click View
    1. If the lab result is systematically matched to a patient, the Patient section will be populated in the lab result display
    2. If the lab result is not matched or the matched patient needs to be changed, the user will need to search for the patient
  2. Optional: click Select to search for and select a patient
  3. Select the I have verified the following lab results belong to the above patient checkbox
  4. Click Sign/Route
  5. Select the Sign checkbox and click OK

Stored e-Lab results can be viewed in the Flowsheets/Labs > Scanned/E-Labs tab of the patient chart.

https://ecqi.healthit.gov/ecqm/ec/2023/cms130v11

 

Return to 2023 eCQMs

 

Didn't find the answer you were looking for?

Contact Sevocity Support 24/7 at 877‑777‑2298 or support@sevocity.com