CMS 134v10: Diabetes: Medical Attention for Nephropathy

Measure: Percentage of patients 18-75 years of age with diabetes who had a nephropathy screening test or evidence of nephropathy during the measurement period
Measure Type High Priority Measure Scoring
Process No A higher percentage indicates better quality
Denominator Patients 18-75 years of age with diabetes with a visit during the measurement period
Numerator Patients with a screening for nephropathy or evidence of nephropathy during the measurement period
Denominator Exceptions None
Denominator Exclusions
  • Patients in hospice care for any part of the measurement period
  • Patients receiving palliative care during the measurement period
  • Patients 66 and older who are living long term in an institution for more than 90 consecutive days during the measurement period
  • Patients 66 and older with an indication of frailty for any part of the measurement period who meet any of the following criteria:
    • Advanced illness with two outpatient encounters during the measurement period or the year prior
    • Advanced illness with one inpatient encounter during the measurement period or the year prior
    • Taking dementia medications during the measurement period or the year prior

A lab interface can be used to meet this eCQM but is not required. Customers interested in a lab interface should contact Sevocity Support to begin the process of a new interface setup. Interface setup requirements and fees vary per request.

Patients who meet the following criteria will be included in the denominator:

  • Age is ≥ 18 years and < 75 years at the beginning of the Measurement Period

    AND

  • Have an active diagnosis of Type 1 or Type 2 diabetes during the Measurement Period

    AND

  • Have at least one eligible encounter during the Measurement Period finalized by the EC

CPT: 99201, 99202, 99203, 99204, 99205, 99212, 99213, 99214, 99215, 99395, 99396, 99397, 99385, 99386, 99387, 99341, 99342, 99343, 99344, 99345, 99347, 99348, 99349, 99350, 98966, 98967, 98968, 99441, 99442, 99443

HCPCS: G0438, G0439

The patient must have an active diagnosis of Type 1 or Type 2 diabetes during Measurement Period. Patients with a diagnosis of secondary diabetes due to another condition are not counted.

Diagnoses are documented in the Assessment tab of an encounter. A comprehensive list of eligible diagnosis codes for diabetes can be located here.

A patient will be excluded from this measure if they meet any of the following conditions:

  • Is in hospice care for any part of the Measurement Period
  • Is receiving palliative care during the Measurement Period
  • Age is ≥ 65 at the start of the Measurement Period and has spent more than 90 consecutive days during the Measurement Period living in long term care
  • Age is ≥ 65 at the start of the Measurement Period and has evidence of frailty and advanced illness

To document hospice care services as a procedure, go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add one of the eligible codes listed below:

SNOMED CT: 385763009, 385765002

Order Status must be marked as Pending or Complete.

SNOMED CT codes must be added as a Favorite in Preferences > Form Data > Orders to be accessible from the Orders/Referrals tab.

Palliative care services can be documented using the FACIT-Pal Questionnaire flowsheet or in the Orders/Procedure tab.

  1. Go to Encounter > Flowsheets/Labs > Standard Flowsheets

  2. Click Add New Flowsheet

  3. Select the FACIT-Pal Questionnaire flowsheet and click Add

  4. Click Add Column

  5. Populate the patient's responses to the questions as appropriate

  6. Click OK to save

Go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add one of the eligible codes listed below:

HCPCS: G9054, M1017

Order Status must be marked as Complete.

To document a stay in long term care:

  1. Go to Chart > Admissions and click Add
  2. Select a Place of Service
  3. Optional: select a Facility
  4. Populate the Admit Date
  5. Optional: populate the Discharge Date
  6. Click OK

If the admissions event does not have a Discharge Date when the eCQM report is generated, the length of stay will be calculated with a discharge date of the Reporting Period end date or the Measurement Period end date, whichever occurs first.

A patient has evidence of frailty if they meet any of the following criteria:

  • Has an active diagnosis of Frailty during the Measurement Period
  • Has an active diagnosis of Frailty Symptom during the Measurement Period
  • Is using a frailty device during the Measurement Period
  • Has a frailty encounter during the Measurement Period

"Frailty" refers to a range of conditions that includes falls and problems affecting mobility.

Diagnoses are documented in the Assessment tab of an encounter. A comprehensive list of eligible diagnosis codes for frailty can be located here.

Diagnoses are documented in the Assessment tab of an encounter. The eligible diagnosis codes for frailty symptoms are:

ICD-10: R26.0, R26.1, R26.2, R26.89, R26.9, R41.81, R53.1, R53.81, R53.83, R54, R62.7, R63.4, R63.6, R64

To document the patient's use of a frailty device:

  1. Go to Encounter > Flowsheets/Labs > Standard Flowsheets
  2. Click Add New Flowsheet
  3. Select the Frailty Device flowsheet and click Add
  4. Click Add Column
  5. Select a Device and the type (Value) of device
  6. Populate a usage Start Date for the device
  7. Optional: populate a usage Stop Date for the device
    1. The Stop Date cannot occur prior to the start of the Measurement Period
  8. Optional: populate a Reason for use of the device
  9. Click OK to save

CPT: 99504, 99509

HCPCS: G0162, G0299, G0300, G0493, G0494, S0271, S0311, S9123, S9124, T1000, T1001, T1002, T1003, T1004, T1005, T1019, T1020, T1021, T1022, T1030, T1031

A patient has evidence of advanced illness if they meet any of the following criteria:

  • Had an inpatient encounter with an active diagnosis of Advanced Illness during the Measurement Period or in the year prior
  • Had 2 or more outpatient encounters with an active diagnosis of Advanced Illness during the Measurement Period or in the year prior
    • Encounters must have different dates of service
    • Diagnosis must be active during all eligible encounters
  • Was prescribed medication for dementia during the Measurement Period or in the year prior

"Advanced illness" refers to a wide range of conditions and includes diseases such as Alzheimer's disease, cancer, and heart failure.

Diagnoses are documented in the Assessment tab of an encounter. A comprehensive list of eligible diagnosis codes for advanced illness can be located here.

CPT: 99221, 99222, 99223, 99231, 99232, 99233, 99238, 99239, 99251, 99252, 99253, 99254, 99255, 99291

CPT: 99201, 99202, 99203, 99204, 99205, 99211, 99212, 99213, 99214, 99215, 99241, 99242, 99243, 99244, 99245, 99341, 99342, 99343, 99344, 99345, 99347, 99348, 99349, 99350, 99381, 99382, 99383, 99384, 99385, 99386, 99387, 99391, 99392, 99393, 99394, 99395, 99396, 99397, 99401, 99402, 99403, 99404, 99411, 99412, 99429, 99455, 99456, 99483, 99217, 99218, 99219, 99220, 99281, 99282, 99283, 99284, 99285, 99304, 99305, 99306, 99307, 99308, 99309, 99310, 99315, 99316, 99318, 99324, 99325, 99326, 99327, 99328, 99334, 99335, 99336, 99337

HCPCS: G0402, G0438, G0439, G0463, T1015

To prescribe a medication, go to Encounter > Medications > Manage/Prescribe Meds > New Prescription. A comprehensive list of eligible dementia medications can be located here.

A patient will be counted in the numerator if they received a screening for nephropathy during the Measurement Period or have evidence of nephropathy during the Measurement Period. Evidence of nephropathy qualifies as one or more of the following:

  • Active diagnosis of Hypertensive Chronic Kidney Disease, Kidney Failure, Glomerulonephritis and Nephrotic Syndrome, Diabetic Nephropathy, or Proteinuria
  • Active prescription for an ACE inhibitor or angiotensin-receptor blocker (ARB)
  • Procedure for kidney transplant, dialysis services, or end-stage renal disease (ESRD) monthly outpatient services performed
  • Dialysis education or Other services related to dialysis performed
  1. Go to Encounter > Flowsheets/Labs > Standard Flowsheets
  2. Click Add New Flowsheet
  3. Select the Diabetes Care flowsheet and click Add
  4. Click Add Column
  5. Populate a Date and a Value for Urine test for protein
  6. Click OK to save

  1. From the Clinic Inbox, select the lab result to be stored and click View
  2. Click Select to search for and select a patient
  3. Verify patient displayed matches the lab result and select the I have verified the following lab results belong to the above patient checkbox
  4. Click Sign/Route
  5. Select the Sign checkbox and click OK

Stored e-Lab results can be viewed in the Flowsheets/Labs > Scanned/E-Labs tab of the patient chart.

Diagnoses are documented in the Assessment tab of an encounter. A comprehensive list of eligible diagnosis codes for hypertensive chronic kidney disease, kidney failure, glomerulonephritis and nephrotic syndrome, diabetic nephropathy, and proteinuria can be located here.

To prescribe a medication, go to Encounter > Medications > Manage/Prescribe Meds > New Prescription. A comprehensive list of eligible ACE inhibitor and ARB medications can be located here.

To document a procedure, go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add one of the eligible codes listed below. Order Status must be marked as Complete.

Kidney Transplant

CPT: 50360, 50365, 50380

HCPCS: S2065

Dialysis Services

CPT: 90935, 90937, 90940, 90945, 90947, 90957, 90958, 90959

HCPCS: G0257

ESRD Monthly Outpatient Services

CPT: 90951, 90952, 90953, 90954, 90955, 90956, 90957, 90958, 90959, 90960, 90961, 90962, 90963, 90964, 90965, 90966, 90967, 90968, 90969, 90970, 90989, 90993, 90997, 90999, 99512

To document the performance of these services, go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add one of the eligible codes listed below. Order Status must be marked as Complete.

Dialysis Education

SNOMED CT: 28812006, 385972005, 59596005, 66402002

Other Services Related to Dialysis

SNOMED CT: 233591003, 251000124108, 311000124103, 3257008, 385970002, 385971003, 385973000, 406168002, 717738008, 718019005, 718308002, 718330001, 718331002, 73257006

SNOMED CT codes must be added as a Favorite in Preferences > Form Data > Orders to be accessible from the Orders/Referrals tab

https://ecqi.healthit.gov/ecqm/ep/2022/cms134v10

 

Return to 2022 eCQMs

 

Didn't find the answer you were looking for?

Contact Sevocity Support 24/7 at 877‑777‑2298 or support@sevocity.com