CMS 125v9: Breast Cancer Screening
| Measure: Percentage of women 50-74 years of age who had a mammogram to screen for breast cancer in the 27 months prior to the end of the Measurement Period | ||
| Measure Type | High Priority Measure | Scoring |
| Process | No | A higher percentage indicates better quality |
| Denominator | Women 51-74 years of age with a visit during the measurement period |
| Numerator | Women with one or more mammograms during the 27 months prior to the end of the measurement period |
| Denominator Exceptions | None |
| Denominator Exclusions |
|
A lab interface can be used to meet this eCQM but is not required. Customers interested in a lab interface should contact Sevocity Support to begin the process of a new interface setup. Interface setup requirements and fees vary per request.
Patients who meet the following criteria will be included in the denominator:
Have a birth sex of female
AND
Age is ≥ 51 years and < 74 years at the beginning of the Measurement Period
AND
- Have at least one eligible encounter during the Measurement Period finalized by the EC/EP
CPT: 99201, 99202, 99203, 99204, 99205, 99212, 99213, 99214, 99215, 99395, 99396, 99397, 99385, 99386, 99387, 99341, 99342, 99343, 99344, 99345, 99347, 99348, 99349, 99350
HCPCS: G0438, G0439
A patient will be excluded from the measure if they meet any of the following conditions:
- Has an active or resolved diagnosis for a bilateral mastectomy or two unilateral mastectomies
- Has a documented medical history of a bilateral mastectomy or two unilateral mastectomies
- Is in hospice care during the Measurement Period
- Age is ≥ 65 at the start of the Measurement Period and has spent more than 90 consecutive days during the Measurement Period living in long term care
- Age is ≥ 65 at the start of the Measurement Period and has evidence of advanced illness
- Age is ≥ 65 at the start of the Measurement Period and has evidence of frailty
Diagnoses are documented in the Assessment tab of an encounter. The eligible diagnosis codes for this exclusion are:
Bilateral Mastectomy
ICD-10: Z90.13
Unilateral Mastectomy
ICD-10: Z90.10, Z90.11, Z90.12
ICD-9: V45.71
If documenting two unilateral mastectomies using a diagnosis code with unspecified laterality, the Anatomical Location Site for Left and Right must be specified when adding each diagnosis code.

To document a bilateral or two unilateral mastectomies in the patient history:
- Go to Encounter > Past History > Structured > Surgical History
- Select the hardcoded Mastectomy node
- Select the appropriate bilateral or unilateral mastectomy type for the patient
- If selecting a unilateral mastectomy type, both Right Breast and Left Breast must be selected
- Populate the Date of Surgery for the mastectomy
- Click OK to save

To document hospice care services as a procedure, go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add one of the eligible codes listed below:
SNOMED CT: 385763009, 385765002
Order Status must be marked as Pending or Complete.
SNOMED CT codes must be added as a Favorite in Preferences > Form Data > Orders to be accessible from the Orders/Referrals tab.
To document a stay in long term care:
- Go to Chart > Admissions and click Add
- Select a Place of Service
- Optional: select a Facility
- Populate the Admit Date
- Optional: populate the Discharge Date
- Click OK
If the admissions event does not have a Discharge Date when the eCQM report is generated, the length of stay will be calculated with a discharge date of the Reporting Period end date or the Measurement Period end date, whichever occurs first.
A patient has evidence of advanced illness if they meet any of the following criteria:
- Had an inpatient encounter with an active diagnosis of Advanced Illness during the Measurement Period or in the year prior
- Had 2 or more outpatient encounters with an active diagnosis of Advanced Illness during the Measurement Period or in the year prior
- Diagnosis must be active during all eligible encounters
- Was prescribed medication for dementia during the Measurement Period or in the year prior
"Advanced illness" refers to a wide range of conditions and includes diseases such as Alzheimer's disease, cancer, and heart failure.
Diagnoses are documented in the Assessment tab of an encounter. A comprehensive list of eligible diagnosis codes for advanced illness can be located here.
CPT: 99221, 99222, 99223, 99231, 99232, 99233, 99238, 99239, 99251, 99252, 99253, 99254, 99255, 99291
CPT: 99201, 99202, 99203, 99204, 99205, 99211, 99212, 99213, 99214, 99215, 99241, 99242, 99243, 99244, 99245, 99341, 99342, 99343, 99344, 99345, 99347, 99348, 99349, 99350, 99381, 99382, 99383, 99384, 99385, 99386, 99387, 99391, 99392, 99393, 99394, 99395, 99396, 99397, 99401, 99402, 99403, 99404, 99411, 99412, 99429, 99455, 99456, 99483, 99217, 99218, 99219, 99220, 99281, 99282, 99283, 99284, 99285, 99304, 99305, 99306, 99307, 99308, 99309, 99310, 99315, 99316, 99318, 99324, 99325, 99326, 99327, 99328, 99334, 99335, 99336, 99337
HCPCS: G0402, G0438, G0439, G0463, T1015
To prescribe a medication, go to Encounter > Medications > Manage/Prescribe Meds > New Prescription. A comprehensive list of eligible dementia medications can be located here.
A patient has evidence of frailty if they meet any of the following criteria:
- Has an active diagnosis of Frailty during the Measurement Period
- Has an active diagnosis of Frailty Symptom during the Measurement Period
- Is using a frailty device during the Measurement Period
- Has a frailty encounter during the Measurement Period
"Frailty" refers to a range of conditions that includes falls and problems affecting mobility.
Diagnoses are documented in the Assessment tab of an encounter. A comprehensive list of eligible diagnosis codes for frailty can be located here.
Diagnoses are documented in the Assessment tab of an encounter. The eligible diagnosis codes for frailty symptoms are:
ICD-10: R26.0, R26.1, R26.2, R26.89, R26.9, R41.81, R53.1, R53.81, R53.83, R54, R62.7, R63.4, R63.6, R64
The use of a frailty device can be documented in the patient's Medical or Social History.
To document the patient's use of oxygen:
Go to Encounter > Past History > Structured > Medical History
Select the hardcoded Oxygen use node
Optional: select continuously or when ambulating
To document the patient's use of a respiratory assistive device:
Go to Encounter > Past History > Structured > Medical History
Select the hardcoded Respiratory assistive device node
Optional: select BIPAP, CPAP, Home ventilator, or Ventilator

To document a patient's bedridden status:
Go to Encounter > Past History > Social History
Select the hardcoded Activities of Daily Living node
Select the Mobilizing/Moving subnode
Select Bedridden
Click OK to save
To document a patient's use of mobility aids:
Go to Encounter > Past History > Social History
Select the hardcoded Activities of Daily Living node
Select the Use of Mobility Aids subnode
Select Dependent on cane, Dependent on walker, or Dependent on wheelchair
Click OK to save

CPT: 99504, 99509
HCPCS: G0162, G0299, G0300, G0493, G0494, S0271, S0311, S9123, S9124, T1000, T1001, T1002, T1003, T1004, T1005, T1019, T1020, T1021, T1022, T1030, T1031
A patient will be counted in the numerator if they received a mammogram during the Measurement Period or in the 15 months before the start of the Measurement Period.
A mammogram can be documented as a procedure, as an e-lab result, or from the Breast Cancer Screening flowsheet.
To document the performance of a mammogram as a procedure, go to Encounter > Orders/Procedure > Orders/Referrals and click Add to add any of the eligible codes listed below:
HCPCS: G0202, G0204, G0206
Order Status must be marked as Complete.
To document that a mammogram was performed, an e-Lab result for the test must be stored to the patient chart.
- From the Clinic Inbox, select the lab result to be stored and click View
- Click Select to search for and select a patient
- Verify patient displayed matches the lab result and select the I have verified the following lab results belong to the above patient checkbox
- Click Sign/Route
- Select the Sign checkbox and click OK
Stored e-Lab results can be viewed in the Flowsheets/Labs > Scanned/E-Labs tab of the patient chart.

- Go to Encounter > Flowsheets/Labs > Standard Flowsheets
- Click Add New Flowsheet
- Select the Breast Cancer Screening flowsheet and click Add
- Click Add Column
- Select Yes for Has the patient had a mammogram in the last two years?
- Populate a date for If yes, what date was it performed?
- Click OK to save

Return to 2021 eCQMs
Didn't find the answer you were looking for?
Contact Sevocity Support 24/7 at 877‑777‑2298 or support@sevocity.com